Saturday, November 19, 2016

Gregg Popovich said it best: Trump - "Sick to my stomach" and "We are Rome"


After finally, ok maybe, being able to somewhat rationally think about this election, here are my thoughts.

Nineteen years ago I took an all day basketball coaching clinic where DVD of coaching by Gregg Popovich, Coach of the San Antonio Spurs, was the one selected by Loudoun County.  I came away extremely impressed with "Pop" as he is called.  He is widely regarded as the smartest and best coach in all of sports and his record proves it.

Pop spoke out on the election at USA Today.  He nailed exactly how I feel.  I highlighted the text that really resonates with me.  There is a recording of Pop discussing his thoughts.  Below is his transcript.
“I’ve spoken on this before and I probably will again. Right now I’m just trying to formulate thoughts. It’s still early and I’m still sick to my stomach. Not basically because the Republicans won or anything, but the disgusting tenor and tone and all the comments that have been xenophobic, homophobic, racist, misogynistic, and I live in that country where half the country ignored all that to elect someone.
That’s the scariest part of the whole thing to me.
“It’s got nothing to do with the environment and Obamacare and all that other stuff. We live in a country that ignored all those values that we would hold our kids accountable for. They’d be grounded for years if they acted and said the things that have been said in that campaign by Donald Trump. I look at the evangelicals and I wonder, ‘Those values don’t mean anything to them?’

“All those values to me are more important than anybody’s skill in business or anything else because it tells who we are and how we want to live and what kind of people we are. That’s why I have great respect for people like Lindsey Graham and John McCain, John Kasich, who I disagree with on a lot of political things, but they had enough fiber and respect for humanity and tolerance for all groups to say what they said about the man.
“I get it, of course we want him to be successful. We’re all gonna say that. Everybody wants him to be successful. It’s our country. We don’t want it to go down the drain. Any reasonable person would come to that conclusion, but that does not take away the fact that he used that fear-mongering and all the comments from day one. The race baiting with trying to make Barack Obama, our first black president, illegitimate. It leaves me wondering where I’ve been living and with whom I’m living.

“The fact that people can just gloss that over and start talking about the transition team, and we’re all gonna be Kumbaya now and try to make the country good without talking about about any of those things. Now we see that he’s already backing off on immigration and Obamacare and other things, so was it a big fake? Which makes you feel even more disgusting and cynical that somebody would use that to get the base that fired up to get elected.

“What gets lost in the process are African-Americans and hispanics and women and the gay population, not to mention the eighth grade developmental stage exhibited by him when he made fun of the handicapped person. I mean, come on. That’s what a seventh-grade, eighth-grade bully does, and he was elected president of the United States. We would’ve scolded our kids, we would’ve have discussions and talked until we were blue in the face trying to get them to understand these things, and he is in charge of our country. That’s disgusting.”
(Reporter tries to ask another question/add a comment.)
“I’m not done.

“One could go on and on. We didn’t make this stuff up. He’s angry at the media because they reported what he said and how he acted. It’s ironic to me. It just makes no sense. So that’s my real fear and that’s what gives me so much pause and makes me feel so badly that the country is willing to be that intolerant and not understand the empathy that’s necessary to understand other group situations.
“I’m a rich white guy, and I’m sick to my stomach thinking about it. I can’t imagine being a Muslim right now, or a woman, or an African-American, a hispanic, a handicapped person, how disenfranchised they might feel. And for anyone in those groups that voted for him, it’s just beyond my comprehension how they ignore all that.

“And so, my final conclusion is — my big fear is — we are Rome.”

The Recognized Problem With The Electoral College


My last blog was on a history of the Electoral College with a rational explanation of why it appears to work for the United States.

Just a little background here on other countries that use an Electoral College from Wikipedia:

"In Italy the presidential electoral college is composed of the members of both houses of Parliament and three members elected by each of the regional assemblies. Other countries with electoral college systems include Burundi, Estonia, Kazakhstan, Madagascar, Myanmar, Pakistan, Trinidad and Tobago and Vanuatu."

Besides Italy, do any of these other countries look like "thought leaders in democracy?"  Of course not.

When I hear people talk about the brilliance of our founding fathers, I have to question their thought process.  Let's see, we have a bunch of slave owners write a document over 228 years ago and NOTHING regarding the appropriate premise of that document has changed?  Really?

Let's clearly state why the Electoral College came about and not popular vote.    By William C. Kimberling, Deputy Director FEC National Clearinghouse on Election Administration.

"A third idea was to have the president elected by a direct popular vote. Direct election was rejected not because the Framers of the Constitution doubted public intelligence but rather because they feared that without sufficient information about candidates from outside their State, people would naturally vote for a "favorite son" from their own State or region. At worst, no president would emerge with a popular majority sufficient to govern the whole country. At best, the choice of president would always be decided by the largest, most populous States with little regard for the smaller ones"

Can ANYONE state that in 2016 that we "lack sufficient information about candidates from outside their State" ?   Of course not.

We saw what happened in 2000 when Al Gore won the popular vote, but George W. Bush became President - an unmitigated disaster.  Millions of Americans (me included) expect these next four to eight years  with Trump to be much worse.   An anti-science, anti-data Republican inherits a VERY sound country and screws it up.  We have seen this movie before folks and it does not end well.  Yes, Hillary had her own set of problems, BUT, give me a typical self-serving politician WHO believes in science every day of the week versus these anti-science and anti-data Republicans.

Of course, it is nearly impossible to get rid of this boat anchor Electoral College, so the idea of one person - one vote is a statistical joke.  In 2016, countries around the globe, except for Trump's Russia, shake their heads in complete disbelief on what is going on in the United States of America.



Sunday, November 13, 2016

My First Drive In The Amazing Audi R8 V10



During the National Corvette Museum trip to pick up John M's 2017 Grand Sport, Chris (fellow SUNWer) let me take out his Audi R8 V10 and here is the video.



Below is me in front of Chris' AMAZING R8! Thanks Chris!







Saturday, November 12, 2016

Tagging Along With John M at National Corvette Museum For Delivery of His 2017 Corvette Grand Sport


Had the privilege of spending three days with John M as he took delivery of his 2017 Grand Sport at the National Corvette Museum along with another ole SUNWer - Chris H who came up in his Audi R8 V10 for the day of delivery.


Above is (from left to right) me, John and Chris in front of John's '17 Grand Sport (GS).


Above is John's GS!


This was the first time I saw both of my and my father's bricks. Above is the  (location 2K with alphabet starting away from store and numbers right to left) Stingray brick from our visit to NCM last year.

Below (location 3N with alphabet starting away from store and numbers right to left) from our 2011 visit where I took delivery of my Grand Sport.



John living the dream!


Above is Chris in front of his Audi R8 V10 and John and is GS.  I will have a separate blog post on Chris' R8 as I have a couple of videos.



Above is John's '17 Grand Sport and my '11 Grand Sport back in VA. We need a photo of my 2016 Stingray and my 11 Grand Sport with John's Grand Sport.  Below is John's '17 Grand Sport and my '16 Stingray after having lunch with Sue Walls in Leesburg in early December.


A great three days - thanks John!

Friday, November 11, 2016

Thanks Veterans!

Thanks to my father John Kenneth Edstrom who did two tours of duty in Vietnam as an officer in the Air Force.  My father is also in the very unique category in that he was awarded TWO BRONZE STARS for the two tours of duty for his countless acts of bravery in his two years in Vietnam.  The Bronze Star Medal is a United States Armed Forces military decoration that may be awarded for bravery, acts of merit, or meritorious service.  

Thanks to my cousin Chris Edstrom who has done multiple tours of duty in Iraq and in Afghanistan.  Thanks to Dr. Harry Foxwell, Paul Warndorf and Brad Kirley for their service to our country.

History of Veterans Day as stated at TimeAndDate.com

On the 11th hour of the 11th day of the 11th month of 1918 an armistice between Germany and the Allied nations came into effect. On November 11, 1919, Armistice Day was commemorated for the first time. In 1919, President Wilson proclaimed the day should be "filled with solemn pride in the heroism of those who died in the country’s service and with gratitude for the victory". There were plans for parades, public meetings and a brief suspension of business activities at 11am.


In 1926, the United States Congress officially recognized the end of World War I and declared that the anniversary of the armistice should be commemorated with prayer and thanksgiving. The Congress also requested that the president should "issue a proclamation calling upon the officials to display the flag of the United States on all Government buildings on November 11 and inviting the people of the United States to observe the day in schools and churches, or other suitable places, with appropriate ceremonies of friendly relations with all other peoples."

An Act (52 Stat. 351; 5 U. S. Code, Sec. 87a) was approved on May 13, 1938, which made November 11 in each year a legal holiday, known as Armistice Day. This day was originally intended to honor veterans of World War I. A few years later, World War II required the largest mobilization of service men in the history of the United States and the American forces fought in Korea. In 1954, the veterans service organizations urged Congress to change the word "Armistice" to "Veterans". Congress approved this change and on June 1, 1954, November 11 became a day to honor all American veterans, where ever and whenever they had served.

In 1968 the Uniforms Holiday Bill (Public Law 90-363 (82 Stat. 250)) made an attempt to move Veterans Day to the fourth Monday of October. The bill took effect in 1971. However, this caused a lot of confusion as many states disagreed with this decision and continued to hold Veterans Day activities on November 11. In 1975, President Gerald R. Ford signed Public Law 94-97 (89 Stat. 479), which stated that Veterans Day would again be observed on November 11 from 1978 onwards. Veterans Day is still observed on November 11.

Harry Foxwell always used to send out a nice email to Sun employees (and I imagine others).  Years ago, he asked the question: Do you know where your veterans are?

Tomb of the Unknowns at Arlington National Cemetery:
http://www.arlingtoncemetery.org/visitor_information/tomb_of_the_unknowns.html
National World War II Memorial: http://www.wwiimemorial.com/
Marine Corps Memorial: http://www.nps.gov/archive/gwmp/usmc.htm
US Navy Memorial: http://www.navymemorial.org/
Air Force Memorial: http://www.airforcememorial.org/
Korean War Veterans Memorial: http://www.nps.gov/kowa//index.htm
Vietnam Veterans Memorial: http://www.nps.gov/vive/index.htm
Vietnam Women's Memorial: http://www.visitingdc.com/memorial/vietnam-women%27s-memorial.htm
Iraq Veterans Memorial: http://iraqmemorial.org/

Department of Veterans Affairs: http://www.va.gov/

Friday, October 28, 2016

One Sheared Bolt = One Crushed Left Hand and Single Points Of Failure (SPOFs) on my bike


It was a beautiful fall day, so instead of driving to grab a sandwich and driving the three or four miles, I thought I would just jump on my bike and ride there.

One attosecond I'm up and riding and enjoying the beautiful fall weather, in the next femtosecond I am knocked out very briefly and lying face down.


Above is the seat bolt, which is the single bolt that kept my bicycle seat on the bike, which sheared off and this is the culprit that caused me to have this accident.  Turns out they make double bolt seat holders.


In the photo above, you see a round indentation and that was a small metal pipe that would HAVE hit and gone through the side of my head. Then to the right of that is where my helmet hit a rock, so having the helmet on and properly adjusted definitely saved my skull.

The big concern I had was my new right titanium hip.  My surgeon specifically told me,  "Dave, whatever you do, do not fall riding a bike because it could be a real mess in terms of trying to fix it".

I fell hard on my right-hand side and slammed my head against the ground, as well as the helmet against rock and a pipe sticking out of the ground, really bruised up my right rib cage bruised and sprained my right wrist and shattered my left hand.  So I wanted to get to the hospital where they did the hip replacement so I did what any person would do and I called Uber :-) after about 15 x-rays and a CT scan of ahead it was determined that the only real damage was my left hand so I was a very very very lucky.  The right hip was okay and I essentially sacrificed, unknowingly, my left hand save my right hip.



The photo above in the one below give some indication of my broken first metacarpal in four pieces



Above you see the metacarpal between thumb and the palm, it's broken in half and then it's also broken two other pieces again so there's four broken pieces.   Below you see the four small titanium rod that the doctor used to put it back together.  Those will have to come out again with surgery in the next few months

 Above is after surgery Thursday night and below is me heading home give me a thumbs up with my good hand.

After all of this I decided to take a close look at my Trek 7500 to see what other single points of failure (SPOFs) that I had and I found three other bolts that if they went I would lose control my bike.  They are circled in red below.  My bike is a ($850) 2009 model and looking at the 2017 hybrid bikes out today, if you spend over $750 you no longer see these Single Points Of Failure.  You should check your bikes out for single points of failure as well. 

Time for new bike and a new helmet (helmets are like airbags in that if you have an accident you have to replace them) for me.


Above and below is my hand at one week.



Above is my removable "Batman" cast.


Above is my x-ray - looking great - at 3 weeks.  Below is my hand at 3-weeks.


Below is my hand at 7 weeks.  This was three days after my surgery to remove the four pins.


Below is Julie when she came in to visit me right after my 18 minute surgery to remove the four pins.   Occupational therapy starts this upcoming Friday.


Even after short surgeries where the put you under, you need to remember to drink lots of water afterwards and take colace to keep your system moving.

At the seven week mark I got a good checkup (one week after the pins were removed).  I was told to use heat in the am and ice in the pm.  If either of those made things worse, then stop and only use what makes my left hand feel better.  I was also told that during surgery, he bent my thumb completely over so the ligament is fine, the bone is fine (still healing) but it will require OT and there will be pain as I work through this.

I see the Dr. again on January 17th, 2017 -- update the checkup went great.

Below is the Trek DS3 I purchased and heavily modified so it can be my new "Harley FatBoy" with NO Single Bolts Of Failure  - NSBOF :-)


I had my last day of OT on February 13th, 2017.   I am back to "normal" in terms of thumb motion, but not my normal range of motion.  The Dr. and the PT tell me it will take a year for it to come all the way back.

I had my last visit with my orthopedic surgeon on April 17th, 2017 and he reiterated to keep up my OT and in October of 2018 wherever my left hand will be at that point will be my new "normal".

Monday, October 24, 2016

Final Lunch With DEV at MEMEX at Montana's - THANKS DEV!



I created a tradition at MEMEX when a software intern's last day was coming up, we took them to Montana's Restaurant and I MADE them wear the Montana horns.  I once told an intern that I would withhold their pay if they did NOT wear the horns - he put on the horns :-)

I knew that when I took my very talent Software and Hardware Development Group out to lunch, there was only one choice and I knew (heard from my son Tim who wore them as well :-)  that I would HAVE to wear the horns, which I enjoyed :-)


From left to right:  Mike, Terry, Gowtham. Jeremy, Ryan, me in horns, Tim, Brian, Doug and Anusha.  Not pictured is Ken who works remotely.

It is worth repeating parts of my press release because it is the TALENTED individuals above that made ALL of it a reality!

In his statement, Dave Edstrom said, "I came to MEMEX almost three years ago, as the CTO to run the Software and Hardware Development division, be an evangelist, and help MEMEX grow. I am extremely proud of what has been accomplished in that time period. At IMTS 2016 we introduced new industry leading products MERLIN Tempus, MERLIN Tempus Enterprise Edition, the MTC-One, Financial Overall Equipment Effectiveness, and MERLIN DNC. I believe these products will pay dividends for many, many years to come. With this strong array of new products, MEMEX will continue to extend its lead as the market innovator and the market leader in measuring manufacturing excellence. I want to be clear, while I am resigning from MEMEX as the CTO, I am not going to another company, and certainly not a competitor. I am quite lucky in that I can take an extended time off to travel, to see friends, relatives, and just kick back. I was very fortunate to have worked with the best development team in the industry at MEMEX and could not be more proud of their smart, creative, and hard work. I wish everyone at MEMEX the absolute best!"

Thanks DEV!

What Motivates Us To Work? TED Talk by Dan Ariely



A very talented software developer sent this to me.

I really enjoyed this very popular TED talk "What Motivates Us To Work?"

Below is the description from the TED talk:

"What motivates us to work? Contrary to conventional wisdom, it isn't just money. But it's not exactly joy either. It seems that most of us thrive by making constant progress and feeling a sense of purpose. Behavioral economist Dan Ariely presents two eye-opening experiments that reveal our unexpected and nuanced attitudes toward meaning in our work."

I especially enjoyed the experiments,  the "Ikea Effect" and the Adam Smith vs. Karl Marx discussion.

Friday, October 21, 2016

The Perfect Corvette Weekend in Ocean City MD


Julie, Michael, Tim and I spent a long weekend a week ago in Ocean City, Maryland and it was the absolute perfect weekend.  We had perfect weather - 70s and not a cloud in the sky - with warm water temperatures where you could easily swim if you wanted to.

The best restaurant for crabcakes is the The Crabcake Factory - where we had a great lunch.

     We stayed at the 12th floor at the Sea Watch condo where our 3 bedroom condo had great views of the moonrise at dawn above and the bay sunset below overlooking Gold Coast Mall.





Above is a 360 degree view of Corvettes at the Beach in OC, MD.




Above is Tim surf fishing.


I went on a metric century (100km or 63 miles) since I did not ride in the Seagull Century because it was raining and with my titanium hip, I don't take chances on falling on my bike.

Below is a 360 degree view of Herring Point, Delaware:




Below was our Monday lunch at Dayton's Famous Fried Chicken, Thrasher's Fries, Dough Roller Pizza and Dumser's Dairyland for ice cream afterwards.  You can see the boardwalk is almost empty and the weather was absolutely perfect!


Thursday, October 13, 2016

MEMEX's New League of IIoT Solutions

Thank You for visiting the MEMEX booth at IMTS 2016

We appreciate the opportunity to share with the new league of IIoT solutions we unveiled at IMTS 2016. Developed using state-of-the-art technologies these solutions aim at increasing your productivity, throughput and profits.  

 
MEMEX offers you a quick recap and all the promised literature

MERLIN Tempus

MERLIN Tempus offers a new generation of tools and a dynamic configurable dashboard that provides a complete view of your shop floor. Developed using state-of-the-art technologies, MERLIN Tempus delivers green-light metrics and analytical capabilities that effectively reduce downtime while increasing throughput and profits.

Adding to the powerful tools of MERLIN Tempus, the Enterprise Edition brings to you the complete OEE and other metrics along with a dynamic visual job scheduler capable of running multiple operation step jobs. With it’s modular architecture, seamlessly incorporate the future Smart Manufacturing technologies into the platform.
Download Literature
MERLIN DNC

MERLIN DNC is a new plug-in for MERLIN, the IIoT communication platform, that connects your CNC machine tools for efficient transfer of CNC programs and other data. With MERLIN DNC load, run (drip-feed) and save CNC programs with up to 1,000 machines simultaneously. It works with machines equipped with Ethernet, RS-232C and tape reader communication interfaces.
Download Literature
MERLIN FOEE

Financial Overall Equipment Effectiveness (FOEE ) enables an organization to link its shop floor performance to actual profit dollars. Furthering Data-Driven Manufacturing initiatives and building on the foundation of OEE, FOEE compares and displays the financial percentage of profit value of products manufactured in a product run relative to potential world class product run performance.
Download Literature
MERLIN MTC-One

MEMEX's MTC-One is a new breed of IIoT hardware allowing manufacturers to equip their machine tools, assembly, production or processing lines with the true power of edge computing, utilizing MTConnect. Take control of your shop floor and optimize your Overall Equipment Effectiveness (OEE) by monitoring up to 110 optional sensor devices with a single MTC-One. Furthermore, leverage MTC-One's dual Ethernet ports or optional wireless capability to dramatically reduce production interruptions and minimize costs associated with ethernet cable installation.
Download Literature
MERLIN Continuous Improvement Roadmap

The MERLIN Continuous Improvement (CI) program, coupled with the MERLIN software platform, is a comprehensive CI implementation roadmap that enables organizations to successfully embrace and adopt CI culture. Complete with integrated templates, reports, and problem solving tools, the MERLIN CI Roadmap drives productivity and process improvement, thereby assisting manufacturers in achieving world class Overall Equipment Effectiveness (OEE) as expediently as possible.
Download Literature
Contact Gord at MEMEX to further explore how the MERLIN platform can help you achieve the true potential of Data-Driven Manufacturing along with IIoT centeric business outcome.
Phone: 905-635-3040
Email: Gord@MemexOEE.com 


Copyright © 2016 MEMEX Inc., All rights reserved.
You are receiving this email because you have indicated an interest in MEMEX IIoT manufacturing productivity products.
Our mailing address is:
MEMEX Inc
3425 Harvester Rd, Suite 105
Burlington, ON L7N 3N1
Canada

Wednesday, October 12, 2016

Dave Edstrom Resigns as the CTO of MEMEX to Pursue Personal Interests

MEMEX Inc.
October 12, 2016 07:00 ET

BRIEF-Dave Edstrom resigns as the CTO of Memex to pursue personal interest... on Reuters
Reuters is the news and media division of Thomson Reuters. Thomson Reuters is the world's largest international multimedia news agency, providing ...

Dave Edstrom Resigns as the 

CTO of MEMEX to Pursue 

Personal Interests


COO of U.S.A. Operations to Serve as Interim CTO

BURLINGTON, ON--(Marketwired - Oct 12, 2016) - Memex Inc. ("MEMEX" or the "Company") (TSX VENTURE: OEE) announces that Dave Edstrom has resigned as the CTO of MEMEX effective Monday, October 10th 2016. Dave Edstrom started with MEMEX in January 2014 and will continue in a transition role over the next 30 days. Rick Mosca, the current COO of MEMEX U.S.A. operations, has stepped in to serve as interim CTO of MEMEX.

Rick Mosca has over 30 years of software engineering experience. He started as a developer and has successfully held several technical leadership positions. Additionally, he has run software engineering divisions at Fortune 500 companies and held the position of a principal at a custom software engineering consulting firm.

Over Mr. Edstrom's tenure as MEMEX's CTO, he has played a fundamental role in MEMEX's technology development initiative. His legacy at MEMEX includes: MERLIN Tempus; MERLIN Tempus Enterprise Edition, the next generation of Industrial Internet of Things (IIoT) communication platform; MERLIN OPTIME, a free gateway to Real-Time manufacturing analytics; along with MERLIN MTC-One, a new breed of IIoT hardware.

In his statement, Dave Edstrom said, "I came to MEMEX almost three years ago, as the CTO to run the Software and Hardware Development division, be an evangelist, and help MEMEX grow. I am extremely proud of what has been accomplished in that time period. At IMTS 2016 we introduced new industry leading products MERLIN Tempus, MERLIN Tempus Enterprise Edition, the MTC-One, Financial Overall Equipment Effectiveness, and MERLIN DNC. I believe these products will pay dividends for many, many years to come. With this strong array of new products, MEMEX will continue to extend its lead as the market innovator and the market leader in measuring manufacturing excellence. I want to be clear, while I am resigning from MEMEX as the CTO, I am not going to another company, and certainly not a competitor. I am quite lucky in that I can take an extended time off to travel, to see friends, relatives, and just kick back. I was very fortunate to have worked with the best development team in the industry at MEMEX and could not be more proud of their smart, creative, and hard work. I wish everyone at MEMEX the absolute best!"

"Dave Edstrom came here from the MTConnect Institute as President and Chairman of the Board, and author of 'MTConnect: To Measure Is To Know' as MEMEX's first CTO," said CEO and President David McPhail. "Dave Edstrom made it clear from the beginning that he wanted to 'put a dent in the manufacturing universe.' Under his leadership, I believe we have done that with all of our new products. Dave was a prolific writer, speaker, and thought leader for MEMEX. Dave was selected as one of 30 visionaries around the globe by Smart Manufacturing Magazine, and he certainly has been a visionary for us. We wish him the best as he takes an extended break from the work life."

About MEMEX:
MEMEX, the developer of MERLIN, an award winning IIoT technology platform that delivers tangible increases in manufacturing productivity in Real-Time, is the global leader in machine to machine connectivity solutions. Committed to its mission of "Successfully transforming factories of today into factories of the future" and encouraged by the accelerating adoption and success of MERLIN, MEMEX is relentlessly pursuing the development of increasingly innovative solutions suitable in the IIoT era. MEMEX envisions converting every machine into a node on the corporate networks, thereby, creating visibility from shop-floor-to-top-floor. MEMEX, with its deep commitment towards machine connectivity, offers solutions that are focused on finding hidden capacity by measuring and managing Real-Time data. This empowers MEMEX's customers to effectively quantify and manage OEE, reduce costs and incorporate strategies for continuous lean improvement. For further information, visit www.MemexOEE.com

Contact Information


  • Media Contact
    Memex Inc.:

    David McPhail
    CEO
    Phone: 519-993-1114
    Email: Email Contact

    Rashi Rathore
    Marketing Specialist
    Phone: 905-635-3040 ext 103
    Email: Email Contact

    Investor RelationsSean Peasgood
    Investor Relations
    Phone: 416-565-2805
    Email: Email Contact